~/jackwent.co.uk
jack@jackwent:~$ cat pfsense-26-10-ce-plus-merge.md

pfSense CE and Plus Are Merging: What Changes in 26.10 and How I'll Upgrade

by published 16 November 20263 min read

I run pfSense CE 2.9.0 on my home router, so when Netgate announced that CE and Plus are becoming one edition, I read the post twice. The short version is good news for people like me. This is what Netgate has said so far, what it hasn’t said, and how I’m going to handle the upgrade.

26.10 isn’t out yet. Netgate says it’s coming before the end of November, and the release notes, installer images and upgrade instructions will go up on netgate.com on release day. I’ll update this post with how my upgrade goes.

At a glance
What’s happeningFrom 26.10 there is one pfSense edition, not CE and Plus
CostThe full feature set is free on any amd64 hardware, with no account or registration
If you run CE 2.9The upgrade to 26.10 is free and happens in place, with your configuration kept
Still paidOnline upgrades to new versions, fleet management at scale, and support
ReleaseExpected before the end of November 2026

What changes

Netgate’s post, ā€œpfSense at 20ā€, says the separate editions ā€œare now one.ā€ Anyone can use the full feature set, including the new GUI and the full API, on any amd64 hardware. Security fixes are free and delivered online. Netgate says it doesn’t charge for security.

CE users also get features that used to be Plus only:

  • OpenVPN DCO
  • Intel IPsec Multi-Buffer, and QAT on hardware that supports it
  • ZFS boot environments
  • Unicast CARP
  • Layer 2 filtering
  • 802.1X bridging with VLAN 0 tagging on the WAN
  • Native NetFlow and IPFIX export

Parts of the base system are now packages, so a single fix can ship without waiting for a full release. The old PHP-based GUI will be retired, but only ā€œwith noticeā€ and once the new GUI covers what it does.

The catch

It isn’t entirely free in every sense. Moving to a later release after 26.10 is free if you reinstall, because the installer saves and restores your configuration. Upgrading online instead needs a subscription, unless you own a Netgate appliance, which gets online upgrades for the life of the appliance. For a home router I don’t mind reinstalling occasionally, but it’s the bit of the announcement I’d read most carefully.

What Netgate hasn’t said

Netgate’s post leaves a few things open, and they matter if you’re planning around it:

  • The licence terms. The post doesn’t say how pfSense will be licensed after the merge, or whether the source stays open. Netgate says it will publish the PHP and FreeBSD source for 26.10 on GitHub.
  • Whether ARM hardware is supported. The free offer is for amd64.
  • Subscription prices.
  • The exact release date.

Check your own hardware before you plan anything. I’d also keep an eye on the licence question, because that’s the part of this I’m least sure about.

What it means for my setup

My router depends on VLANs, a VPN, and pfBlockerNG with Suricata or Snort. Here is what Netgate’s post says about packages:

  • HAProxy, FRR and ACME keep working on 26.10.
  • pfBlockerNG keeps working in the existing GUI until that GUI is retired.
  • A built-in feature called ThreatGate is described as the successor for DNS-based blocking.

The post doesn’t mention Suricata or Snort, VLANs or WireGuard, so I don’t yet know how they behave on 26.10. I’ll find out when I upgrade, and I’ll say what I find here. OpenVPN users get DCO as a bonus.

My plan

I like to upgrade early, so I’ll do it on release day. Before I touch anything I’ll save the configuration, read the release notes, and check the upgrade instructions for anything about my packages. Netgate’s advice for earlier releases was to review the pre-upgrade steps first, and I’ll do that too.

I’m glad about the merge. A firewall that’s fully featured and free, with security fixes that don’t cost anything, is what I’d want from the project.

Was this helpful?

[jackwent]